Direct-Mount Front Fitment
Vehicle-specific direct-mount configuration for Toyota Tundra (XK50) and Toyota Sequoia (XK60) front-axle applications.
Pay in installments of $165.87 with
,
and
Shipping Estimate
USA
- USA
- CAN
- USA
- CAN
Ships within 48 hours · Estimated delivery Jul 22 - Jul 27
Promo Codes Available:
For Your Every Summer RSVP, with Code: SUMMER15
Description
2007-2021 Toyota Tundra & 2008-2022 Sequoia AR6 Direct-Mount Front Big Brake KitDirect Mount Series Front Axle 6 Piston 2007 2021 Toyota Tundra (XK50) & 2008 2022 Toyota Sequoia (XK60) AR6 Direct Mount Front Big Brake Kit The TTSPORT AR6 Direct Mount Series front big brake kit is engineered for Toyota Tundra (XK50) and Toyota Sequoia (XK60) builds that need stronger front axle braking under towing, payload, larger tires, armor, roof loads, and repeated downhill use. It pairs a forged 6 piston caliper with 362 mm 32 mm two piece
Direct-Mount Series · Front Axle · 6-Piston
2007-2021 Toyota Tundra (XK50) & 2008-2022 Toyota Sequoia (XK60) AR6 Direct-Mount Front Big Brake Kit
The TTSPORT AR6 Direct-Mount Series front big brake kit is engineered for Toyota Tundra (XK50) and Toyota Sequoia (XK60) builds that need stronger front-axle braking under towing, payload, larger tires, armor, roof loads, and repeated downhill use. It pairs a forged 6-piston caliper with Ø362 mm × 32 mm two-piece front rotor assemblies, stainless-steel braided lines, and vehicle-specific fittings for firm, predictable pedal response.
Why Toyota Tundra XK50 & Sequoia XK60 Builders Choose the AR6
6-Piston Forged Caliper
Two-piece forged aluminum body with 30 mm × 2 / 34 mm × 2 / 38 mm × 2 heat-insulated pistons and dust boots.
55.0 cm² Piston Area
55.0 cm² total piston area per caliper helps deliver controlled clamp force for heavier front-axle braking loads.
Two-Piece Rotor Assembly
Ø362 mm × 32 mm internally vented front rotor assembly with fixed mounting, directional design, and curved-slot face pattern.
102 mm Spoke Clearance
AR6 requires 17 in or larger wheels and at least 102 mm of spoke clearance to the front caliper.
Stainless Braided Lines
PTFE inner liner, SUS304 stainless-steel braid, and PVC protective outer sheath help reduce hose expansion under braking load.
The staggered piston layout helps equalize pad pressure across the rotor face, reducing taper wear and improving release feel. The Ø362 mm × 32 mm two-piece rotor assembly adds thermal capacity for full-size truck and SUV use in stop-and-go traffic, mountain descents, towing, and loaded travel.
AR6 Direct-Mount Technical Specifications & Kit Options
| Brake Caliper | |
|---|---|
| Series | Direct-Mount Series |
| Model / Application | AR6 |
| Axle Position | Front |
| Piston Count | 6-piston |
| Piston Type | Two-piece heat-insulated pistons with dust boots |
| Piston Diameter | 30 mm × 2 / 34 mm × 2 / 38 mm × 2 |
| Caliper Dimensions | L 330 mm × W 167 mm × H 128 mm |
| Total Piston Area | 55.0 cm² per caliper, all pistons combined |
| Manufacturing Process | Two-piece forged aluminum body |
| Net Weight | 4.45 kg per caliper, without pads |
| Surface Finish | High-temperature gloss coating |
| Recommended Wheel Size | 17 in or larger |
| Recommended Rotor Size | Ø362 mm × 32 mm |
| Brake Rotor | |
| Rotor Material | Heat-treated high-carbon cast iron |
| Axle Position | Front |
| Rotor Dimensions for This Application | Ø362 mm × 32 mm |
| Construction | Two-piece rotor assembly |
| Ventilation | Internally vented |
| Rotor Mounting | Fixed |
| Directional Design | Yes — left/right specific |
| Rotor Face Pattern | Curved slot |
| Brake Pads | |
| Compatible Rotor Material | Iron / steel rotors only |
| Operating Temperature Range | 0–600 °C |
| Average Friction Coefficient | Average μ: 0.38; variation depends on temperature, line pressure, and rotor condition |
| Lines | |
| Brake Line Construction | Three-layer reinforced construction |
| Brake Line Material | PTFE inner liner / SUS304 stainless-steel braid / PVC protective outer sheath |
| Brake Line Fitting Type | Vehicle-specific fittings; caliper-side and chassis-side fittings vary by application |
| Vehicle Application & Rotor Mapping | |
| 2007-2021 Toyota Tundra (XK50) | Front · Ø362 mm × 32 mm |
| 2008-2022 Toyota Sequoia (XK60) | Front · Ø362 mm × 32 mm |
| Fitment & Installation | |
| Primary Vehicle Application | 2007-2021 Toyota Tundra (XK50) · 2008-2022 Toyota Sequoia (XK60) |
| Model Years | Toyota Tundra XK50: 2007-2021 · Toyota Sequoia XK60: 2008-2022 |
| Axle | Front |
| Caliper Mounting Type | Direct mount |
| Minimum Wheel Size | 17 in or larger |
| Minimum Spoke Clearance | 102 mm |
| Brake Line Fitting Type | Vehicle-specific fittings; caliper-side and chassis-side fittings vary by application |
| Bedding-In Procedure | Required |
For Toyota Tundra XK50 and Toyota Sequoia XK60, the correct AR6 front rotor specification is Ø362 mm × 32 mm with two-piece rotor assemblies. Confirm 17 in or larger wheels, 102 mm minimum spoke clearance, and brake-line fitting compatibility before ordering.
What’s Included in the AR6 Direct-Mount Kit
Calipers ×2
2 × AR6 6-piston forged aluminum front calipers, left/right specific.
Brake Pads
Brake pads for both front calipers, rated 0–600 °C and intended for iron / steel rotors.
Brake Rotors ×2
2 × Ø362 mm × 32 mm two-piece front rotor assemblies, internally vented, curved-slot, and left/right specific.
Brake Hoses ×2
2 × three-layer stainless-steel braided brake lines with PTFE inner liner, SUS304 braid, PVC protective outer sheath, and vehicle-specific fittings.
Mounting Hardware
Vehicle-specific direct-mount hardware for Toyota Tundra XK50 / Sequoia XK60 front-axle installation.
AR6 is a Direct-Mount front kit. Caliper brackets are not used on this configuration. The rotors are supplied as two-piece rotor assemblies, not one-piece rotors.
Will It Fit Your Tundra XK50 or Sequoia XK60?
AR6 requires 17 in or larger wheels with at least 102 mm of spoke clearance. Wheel diameter alone is not enough; spoke shape, offset, spacer use, and inner barrel profile must be checked before ordering.
1. Wheel Diameter
17 in or larger wheels are required.
2. Spoke Clearance
Minimum spoke clearance: 102 mm. Check spoke shape, offset, spacer use, and inner barrel profile before ordering.
3. Vehicle Model
Application: 2007-2021 Toyota Tundra (XK50) and 2008-2022 Toyota Sequoia (XK60), front axle, with Ø362 mm × 32 mm rotor specification.
Send your model year, trim, front brake hardware photos, wheel specs, and use case before ordering so TTSPORT can confirm compatibility.
Installation & Bedding for Tundra XK50 & Sequoia XK60
- This AR6 kit is engineered for the front axle of Toyota Tundra XK50 and Toyota Sequoia XK60.
- The correct front rotor specification is Ø362 mm × 32 mm with a two-piece rotor assembly.
- Direct-Mount Series uses vehicle-specific front mounting geometry and vehicle-specific brake-line fittings.
- Brake-line fittings vary by application; confirm model year, trim, and front brake hardware before ordering.
- Confirm 17 in or larger wheels and 102 mm minimum spoke clearance before ordering.
- Install left/right specific rotors on the correct side for proper venting and curved-slot orientation.
- A proper bedding-in procedure is required to transfer pad material evenly to the rotor face and stabilize friction performance.
- Professional installation by a qualified brake technician is recommended.
Toyota Tundra XK50 & Sequoia XK60 AR6 Front Big Brake Kit FAQ
Will this AR6 front kit fit Toyota Tundra XK50 and Toyota Sequoia XK60?
Yes. This AR6 Direct-Mount front kit is configured for 2007-2021 Toyota Tundra (XK50) and 2008-2022 Toyota Sequoia (XK60). The correct front rotor specification is Ø362 mm × 32 mm.
What axle and rotor size does this AR6 kit use?
This is a front-axle kit using Ø362 mm × 32 mm two-piece, internally vented, directional front rotor assemblies with a curved-slot face pattern.
What wheel size and spoke clearance are required?
17 in or larger wheels are required, with at least 102 mm minimum spoke clearance to the front caliper. Wheel diameter alone is not enough; spoke shape, offset, spacer use, and inner barrel profile must be checked before ordering.
Is the AR6 rotor one-piece or two-piece?
The AR6 uses a Ø362 mm × 32 mm two-piece front rotor assembly. Do not describe this application as a one-piece rotor setup.
Does this kit use caliper brackets?
No. This is a Direct-Mount Series AR6 application with direct-mount front calipers and vehicle-specific front mounting geometry. Caliper brackets are not used on this configuration.
Can I reuse the factory hydraulic system and ABS?
Yes. This AR6 kit is designed to work with the factory hydraulic system and ABS on supported Toyota Tundra XK50 and Toyota Sequoia XK60 applications. Professional installation and full system bleeding are required.
Are the included pads street-friendly?
Yes. The included pads operate from 0–600 °C with an average μ of 0.38, suitable for street driving, towing, and loaded truck or SUV use on iron or steel rotors.
Do I need to bed the brakes in?
Yes. A proper bedding-in procedure is required to transfer pad material evenly to the rotor face and reach stable braking performance.
Ready to spec your AR6 Tundra or Sequoia front brake build?
Need front fitment confirmation, wheel clearance review, or a matched front + rear brake setup?
Shipping Notes
- Free Standard Shipping on $100+ Orders to the USA.
- Except Preorder products are shipped in 48 hours.
- Delivery to the USA:
- Standard Shipping : 3-10 business days
- If time is of the essence, please consider selecting expedited delivery for faster service.
Exchange/Return Notes
- We offer a 30-day return/exchange service after receiving.
- Final sale items are not eligible for returns or exchanges.
- To process your return/exchange, please contact us at [email protected]
- Please click here for more details>>> Return & Exchange Policy
4.1 ★★★★★
Based on 21 reviews
Sort
Product Reviews
★★★★★ 5
Perfect fit
Size: X-Large, Color: Wine Red
This suits was a perfect fit for my son.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on April 7, 2026
★★★★★ 4
Nice
Size: Medium, Color: Black
Fits my son nice. Pants a little baggy but they're ok, jacket fits amazing, and vest is a little big but is comfortable. Great quality. Not too thick but not too thin.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on March 26, 2026
★★★★★ 5
Very nice suit for the money
Size: X-Large, Color: Khaki
Nice suit for my daughter wedding i order a large the pants was perfect but the vest and jacket was little tight I exchange t it for extra large smooth transaction ,the extra large the suit was perfect but the pants was way too big I had to have them tailored but a awsome suit for the price it looks very nice .
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 23, 2025
★★★★★ 5
Perfect for the money
Size: Medium, Color: Black, Size: Medium, Color: Black
Is this the best quality suit you can find, no. But it is way better than expected for the money. Worked perfectly for prom and cost way less than a rental. He looked very nice. Length and width of legs was a bit larger for him but he is a slender guy. 165lbs 5’11”
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on May 10, 2026
★★★★★ 3
The style
Overall the suit is good. The picture shows white buttons, but came in black. I have to swap out the black for all white.
WAS THIS REVIEW HELPFUL?YesReportShare
Reviewed in the United States on November 3, 2025
recommand products
Velum Towel Ring - Matte Black IAO20846-BL Delta
105.65
Albion Widespread Bathroom Faucet - Matte Black 35855LF-BL Delta
224.16
Emmeline Touchless Bar Faucet with Pulldown Spray - Matte Black 9982TL-BL-DST Delta
451.66
Albion Single Hole Bathroom Faucet - Champagne Bronze 15855LF-CZ Delta
163.00
Everly One Light Pendant in Natural Brass
199.99